DESCRIPTION
Impact shock absorber flat band, made of high tenacity polyester 1 '' wide, designed to dissipate the force and limit the distance of free fall of the worker. For work under tension (111,220,440 Volts). Its striking color facilitates rapid remote monitoring of its use. This equipment is elaborated under strict quality standards that offers an appropriate operation to be used.
INSPECTION
Make the inspection a routine before and after each use. Always check your equipment for damage, deterioration or malfunction. Additionally, an inspection plan must be prepared by qualified personnel. A written and / or electronic record of that inspection must be filed.
MAINTENANCE
Wash by hand with warm water and neutral soap, dry hanging always in the shade. Store your equipment in a dry place, free of corrosive and dangerous gases, as well as out of direct contact with sunlight.
CHARACTERISTICS
Model: SAW-E
System: Against falls
Band: High tenacity polyester 1 '' wide
Hooks: Steel
Mechanism: Double insurance
Length: 1.83mts
Maximum elongation: 1.07mts / 42 "
Product weight: 0.700kgs / 1.54lbs
Capacity: 140kgs / 310lbs
Maximum force of fall: 408kgs / 900lbs
Connection point: 1,200kgs
Color: Red with yellow
End with high tenacity polyester band eyelet and the other end with a textile connection that helps decrease and the voltage having a low connectivity.
Standard: The band complies with Federal Motors FMVSS302 Flammability Standard, and is manufactured based on ANSI Z359.1
Steel hook meets standard ANSI Z359.1
| Available Options: |
| length: | |
| |
|
Life line buttonhole damper Datasheet
